Here is the fix for the i760:

1. Install threaded SMS (cody version) normally.
2. Delete the following registry keys:

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\PC10
HKEY_LOCAL_MACHINE\SOFTWARE\Palm\Varnish\Messaging\MMS

3. Change the following registry key to:

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByCTAndAppId\application/vnd.wap.mms-message\Default

80409F46E414C801

Make sure threaded SMS & MMS are not running and soft reboot afterward. The only issue I've had is when I receive a MMS, the notification appears (today screen notification) on both MMS & threaded SMS, which is annoying more than anything. Functionally, it works perfectly.

Hey, I am trying to figure out if I want to install this. Can somebody post a screenshot?

__________________
Dw
________________________________________
"I drank what?"
-Socrates

Can anyone else back this up as working? If so I think this is a good candidate for the FAQ and can be packaged up as a CAB installer for mrailings tool pack.

__________________
Thanks
- Andrew - PDAPhoneHome.com

Thanks for pointing me in the right direction. But following your instructions didn't work. (MMS were not delivered to my phone)

I did get it working with the following though:

Changes

1. You will need to Delete PC10 in the
   HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId registry key
2. Instead of using the 80409F46E414C801 ID, you will need to copy/paste the ID from the ByGenericId section relating to MMS.

I received an MMS message without a problem that way. And, I only got one notification.

Ok, I'm a little confused. The ID is different from phone to phone, or did you change a different key? I still get two notifications, I would love to know which key you changed so that you only get one.....

This won't be in the tools pack, the tools pack is standalone and isn't dependent upon any software to be installed. With the current software I am using to generate a CAB file, I can't remove a registry key, only change them. So depending on how this works, it looks like it will be a manual change.

__________________
-Michael
Need help setting up your i730/i830 or other WM2003/WM5 Phone, as well as the other hacks I have done, check out the MRailing Guides and Links

This worked for me!!! It didn't work if I typed the GenID key. I had to copy and paste.....

jv

It appears to be different from phone to phone.

Mine was: 8018834FCA14C801

I don't know how I text without this app!! It is fab-u-lous!!!!

jv

I am a first time reg editor so I want to make sure that I get this right before I go messing around with it. Do I delete the whole PC10 folder or just the pc10 file within the pc10 folder.

Secondly, where do you copy the ID file from and to?

Sorry if I sound dumb but I don't want to go messing things up.

I am curious to know as well what key, and where do I find it? The one that needs to be copied that is, where is is located?

Thanks for the help in advanced guys.

__________________
"In the end, the things we regret most are the chances we never took"

HKLM\security\PushRouter\Registrations\ByGenericId\ then select the first key. Should be a long Alphnumeric number. Goto the GenId key and copy the value....

jv

I followed these instructions to the last detail but to no avail, I'm till not getting MMS messages delivered to my phone. Would of been nice to be able to use this app as it seems like a very nice way to send SMS...

Thanks again.

__________________
"In the end, the things we regret most are the chances we never took"

Is anyone else using this app with SPB Phone Suite? I am having a problem where only about 20% of the time will the SMS today plugin and the SPB Phone Suite Icon show that I have unread text messages. The other 80% of the time both these read 0 messages, but I have the notification button on the left soft key.

Actually I am using it with SPB Phone Suite, and I was getting the correct notifications when I did receive SMS, but I am not gettung MMS...

__________________
"In the end, the things we regret most are the chances we never took"

Can someone who has done this write up some easy step by step directions to get MMS working correctly. Thanks.

Ok so I followed the directions above for the most part, listing it below:

1. Install threaded SMS (cody version) normally. ***Copy the cab file as is to your storage card and run from there***

2. Go to and delete the following registry key: (delete the entire PC10 folder)

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\PC10

3. Go to the following:

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\

Click on the first key (it should be a long alphanumeric number) then go into the GenId key inside of that and copy its value. (Make sure you copy it)

4. Then go to and change the following registry string:

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByCTAndAppId\application/vnd.wap.mms-message\Default

You will change the value of Default = to whatever your GenId value was, that you copied.

5. Then make sure threaded SMS and stock MMS are not running and do a soft reset.

This is how I got it to work without problems, should work just fine, getting all notifications just fine now and SMS and stock MMS are working fine. For MMS messages you will still use your stock application.

Much thanks to everyone!

--

__________________
"In the end, the things we regret most are the chances we never took"

for step 2 - does anyone actually have PC10 under Registrations?

for me, PC10 is under:
HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\PC10
is that the one we are supposed to delete?

also, goat said to delete this:
HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\

...ismael, did you delete this or was it not necessary?

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\PC10 is the one you want to delete.

Their was a typo on Step 2 it should be.
HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\PC10

By the way thanks for figuring this out it works great