Have you gotten a progress bar yet?

No need to worry, but, you may want to restart the process. Make sure your not connecting through a hub.

,Dave

Ok i cant get past the reset part. I am using a macmedia cable and resetting as oon as i press the ok button. just like when i installed sdwm5. and i cant get the reset going

are you putting the PDA in Emergency mode?

The auto reset is not working right so after you reset you need to hold Send and End while pressing the reset hole to get it into Emergency Mode.

,Dave

Gotter going now, hehe bit of a manual dexterity prob.

Also superdave i needed six zeros instead of the five you have posted for the code.

Sorry typo, I added the 6th 0 to the post.

,Dave

ahh all is well
Thanks a million SuperDave!

Boy, I hope I'm not doing something dumb.

Installed VZWM5 today from a clean machine; install went great. Went to downgrade the phone back to YH25, installed PST, didn't see the I730 because I forgot to install the I730 update for PST , installed, rebooted, soft reset my phone, got the modem drivers to detect, soft reset the phone and rebooted the machine for good measure -- man, I've tried every combination of rebooting possible, I think.

Every time I set the phone to USB modem and get into PST, doubleclicking on the I730 gets me a "Debug Assertion Failed" error. I found one hit for that error by searching the forum, but the guy that asked never got an answer. I'm pretty much mystified. Any ideas?

EDIT: So I paid a little more attention to the error, and am now more confused. The debug assertion that failed was in dlgdata.cpp, line 43. Now, it's been a while since I did any MFC coding, but IIRC, that has *nothing* to do with I/O at all -- dlgdata deals with the managing of UI objects, doesn't it?

did you put the phone in data mode (**Path) while it was cradled so that PST could recognize it?

Well, sort of I put it in USB modem mode, sure. Didn't use **path, as AFAIK that hasn't worked since YE05. Used Settings->System->Data Connection.

ya, that's what I meant.. Did you install the DLL support files for the YE05?

It's in the SD WM5 package.

**UPATH is everything since YE05.

__________________
-Michael
Need help setting up your i730/i830 or other WM2003/WM5 Phone, as well as the other hacks I have done, check out the MRailing Guides and Links

I degraded to YH25 and tethering work as before with SD WM5, but I have noticed that the BT connection with my moto820 is now skipping. I just received them and have only used them with the official VZ WM5 release (including the phone), then they worked without skips.
Is there something in the Phone stack that would cause this?

__________________
Mike

Limey - Try SD's speedstepping utility.

Also, check to see if you have allow devices to discovery checked. There should be nothing with the new radio that would effect that. Im streaming from shoutcast to my 820's as I type this. Have not a a single skip in several hours of listening.
,Dave

Mrailing,
Thanks for the shortcut -- didn't know that. That seems to also add the UART tab, which isn't available from the regular Data Connection menu; pretty cool. But that's not actually needed for this, right? B/c other than that, they seem to do the same thing. So I still don't know what's wrong.

abuttino,
Yes, I added the DLL support files. Otherwise, I wouldn't see the phone in PST at all, right?

I have Speed Step installed, but I should have looked, the auto discovery was set on the phone. I have noticed that there are skips anytime there is any device with auto discovery on within range, laptop or even the i730 itself.
I'll check next time before I call for help.

__________________
Mike

This is now out my realm, I can only suggest uninstalling and re-installing the PST and support DLL. Wish I could help ya more.

slinkygn,
What os/sp level are you on.

,Dave