In its most simplistic form, we're just talking about an Icon/Utility that would either simultaneously or in sequence launch two executables right?
Yup, at it's most simplistic.
But if something like the old MS-DOS/Windows 9x batch Processor that would allow some very rudimentory scripting could be developed (for instance "pause" some Dos style file operations, goto, repeat, if-then etc. and of course "end") I'm sure that I, and many others would be willing to cough up a couple of bucks for it.
__________________
Don't mess with old futs...age and treachery will always overcome youth and skill! B. S. and brilliance only come with age and experience!
I've done some searching... Looks like MortScript may be the ticket.
WOW! Thanks, I haven't time to look closer at this while at work, but it looks like it should be great. Things like delaying things in the startup folder to allow other things to happen. Since I don't sprechen ze deuch, it should be fun to figger out.
__________________
Don't mess with old futs...age and treachery will always overcome youth and skill! B. S. and brilliance only come with age and experience!
I've done some searching... Looks like MortScript may be the ticket.
I've had a little chance to play with this. It turns out to be a VERY powerful scripting language and interpreter. I haven't done any serious programming since BASIC had line numbers and C didn't have any plusses, so this is much more powerful than I need. But it is possible to used a very small subset. A sample program wold probably look something like this to start PA after a five second delay.
sleep 5000
run /SafeStore/Programs/pa.exe
exit
This would be named PA Delay.mscr and placed in the startup folder instead of the link file.
Enjoy!
__________________
Don't mess with old futs...age and treachery will always overcome youth and skill! B. S. and brilliance only come with age and experience!
Still a little bummed I can't get this to work on the imate jam (xda mini, magician etc.). It 'should' work as it uses the MS stack etc. If anybody has managed to do this then I'm all ears!
I just started using my headset (first time using BT anything). Anyhow, I followed the instructions for using the toggle - which work wonderfully, thank you.
Couple of issues that I couldn't find in reading the different threads.
I have no 3rd party software and have only added the three files from this thread.
1. When my device is in toggle off mode - not all sound is through headset, I am able to activate my voicecommand just fine by pressing a button on the headset. However, when I toggle on and hear all sound through headset, I can no longer activate the voicecommand using the button on the headset (although I can by pushing the button on phone and then speaking through headset).
Any thoughts or ideas on how to be able to activate voicecommand using my headset WHILE toggle is on?
2. There has been some discussion about my next issue, but none that got specific enough for me to understand/use. I would like to have my phone tell me who is calling through my headset (as in caller ID, but oral, not visual)...I have NO idea how to do this. All the discussion I could find seemed to assume we knew how to use this. There seemed to be a nice lady's voice tell us who is calling, but I don't know how to do it.
Is it standard on the phone?
Is it a 3rd party program?
If I choose it will it always tell me who is calling through the speakers or headset? This would be annoying as I usually don't plan on using the headset but would rather not here "so and so is calling" vs my ring.
I would love any help on both issues and also some directions on how - they don't have to be terribly in depth, just enough to tell me how to do it.
I just started using my headset (first time using BT anything). Anyhow, I followed the instructions for using the toggle - which work wonderfully, thank you.
Couple of issues that I couldn't find in reading the different threads.
I have no 3rd party software and have only added the three files from this thread.
1. When my device is in toggle off mode - not all sound is through headset, I am able to activate my voicecommand just fine by pressing a button on the headset. However, when I toggle on and hear all sound through headset, I can no longer activate the voicecommand using the button on the headset (although I can by pushing the button on phone and then speaking through headset).
Any thoughts or ideas on how to be able to activate voicecommand using my headset WHILE toggle is on?
2. There has been some discussion about my next issue, but none that got specific enough for me to understand/use. I would like to have my phone tell me who is calling through my headset (as in caller ID, but oral, not visual)...I have NO idea how to do this. All the discussion I could find seemed to assume we knew how to use this. There seemed to be a nice lady's voice tell us who is calling, but I don't know how to do it.
Is it standard on the phone?
Is it a 3rd party program?
If I choose it will it always tell me who is calling through the speakers or headset? This would be annoying as I usually don't plan on using the headset but would rather not here "so and so is calling" vs my ring.
I would love any help on both issues and also some directions on how - they don't have to be terribly in depth, just enough to tell me how to do it.
Thanks.
Did you install Voice Command on your phone?
This only works with VC.
Voice Signal comes free on the pohone already installed.
__________________
VZW, It's 2009! Time to embrace technology, not suppress it. - oops too late I've moved on over to the iPhone w/ AT$T!
I am not sure which you are asking for VC (problem one or two).
#1. I use VC and this is exactly the problem. When toggle is on to all audio to headset I cannot initiate VC by pressing the button on my headset (however, i can initiate it when toggle is off by pressing button on headset).
#2. I don't know how I would use VC for caller id - would it always be on and instead of ringing tell me who is calling?
Not sure how or if VC has anything to do with saying name of caller.
I received my insurance replacement i730 and I discovered that this file (BTAGExtModule.dll) is making it so that I do not receive calls. I am placing it in the windows folder and the purpose is to keep the audio going through bluetooth after initiating VC. This worked great on my other i730 for when I am driving and I want the navigation through the bluetooth.
I read through the thread and did not find anything. Any suggestions?
It probably is that your new phone has the YH25 update on it, which changed the way a few things worked, and killed a couple of hacks. Dial #4357* and look at the last few digits of the Phone Verison.
__________________
-Michael
Need help setting up your i730/i830 or other WM2003/WM5 Phone, as well as the other hacks I have done, check out the MRailing Guides and Links
Great job was wondering when some one was coming out with a hack and it happen great job keep up the good work and i know i haven't been on in a long time just working and the samsung phone rockz just waiting on the new os and then i'm set thx again i can't babble all day if i wanted too lol
I know that this isn't/wasn't approved and verified for the Treo 700W but i tried it and I don't think it is working. I click the BTAudioOn.exe and then on my home screen i see the BT icon go to a headset but then when i try to do any audio, it just come's out of the speaker. Should i be doing something different? Am I doing something wrong?
BTW I have this installed to my SD card....Will that make a difference?
Thanks for this because I have tried others and couldn't get any to work on my SDA. Last Friday I sent my old Nokia 6230(Cingular) to get flashed and to get the "hardlock" removed because I needed this ability. The SDA had me bummed out. Now....
Even if the WM5 rollout doesn't have A2DP included I don't think it would be too long until a version of the Microsoft Bluetooth stack with the A2DP profile is ported over to our release.
Login
Panel
