it appears to have overwritten the original file and is working properly...thanks!

is there any way from the audiopara file to adjust bluetooth volumes? the headset a tiny bit louder and the bluetooth mic louder would be helpful with the course extended

I had suggested the rename to .csv_orig to be conservative which I think is causing problems for some folks.

I think this file is a ROM file so there are really two versions. So when you rename another file magically appears.

The best way it to PASTE the correctly named file over the original.

Hey mswlogo, did you ever dig up that reg entry for the startup volume? I think you mentioned initcallvol, but I could not find it with a reg search.

i think it was me who mentioned it. i can find it again by a differential between reg exports...let me wake up first.

I think it was key [HKEY_CURRENT_USER\ControlPanel\SoundCategories\InCall] and value InitVol. I now use "Profiles for Windows Mobile", and it has an option to set this with each profile, so I dont have to change the reg key anymore. I am not 100% sure about this key because it did not change when I changed my sound profile. However before I started using this app I had set it to max vol initially through the registry and I'm almost positive that that's the key.

Let me know if that works

Thanks dcd, I'll give it a shot.

I see the value in mine is at 2, that translates to one notch below max when I soft reset. What value should I set it to max it out?

So which file outta the 5-6 works the best? Im hoping one of them raise the phone, earpiece, and BT volume.

TBA, It's really a choice between the last 2.

Read my update notes which try to explain the difference between coarse and fine.

P.S. Sorry I have not had much time to play with this further as my daugfhter has been sick. I think this file has potential to adjust a few more things, but I just have not had the time. I may get back to it soon, I don't know. But don't be afraid to experiment on your own.

i don't really hear a difference but maybe it's cause i didn't try it out long enough. Could it be because the initvol is still on value 2? If so, what should it be set to?

Coarse has a wider range and larger steps.
Fine has less range and very small steps. Fine can't go as low in volume as coarse.

The Max Volume is the same.

The reason I offser fine is as you get louder it distorts. Fine gives you very fine control over loudness and distortion. Where coarse may jump from moderately loud and no distortion to loud with distortion in one large step. Where fine allows you to choose a step in between.

Choosing between the two has nothing to do with initvol.

hi i just got my Mogul and the earpiece is very low i read this post and it sounds great but dont have any idea how to do it to put it into my phone can sum1 help please thanks where do i find all this files you guys are talking about can i get a step by step on how to do this

If you are new, I sugest you read the forums a little while. Learn how to install, remove software. Learn how to move files between it and PC etc. and get more comfirtable before attempting playing with this.

It's not that hard and has been explained in this thread but you need to understand some basics to be able to understand this thread.

Hack has been working pretty good, it certainly makes a HUGE difference.

Anyone else notice though that occasionally there will be a major crackling in the earpiece and speaker for the entire call, but once you hang up and make another call it goes away?

__________________
iPhone 3GS !!

I find volume varies a bit on the Network itself without changing anything.

k thanks will check it out

This has been my experience from day 1 with the Mogul. If I use a wired or BT headset, then there is no problem. Only get this when not using any headsets.

__________________
~ Scandalous ~

I just picked up the HTC PPC-6800 (Alltel) last week and love it, the only thing that I do not like about it is that the ear piece volume is very low during calls (even when maxed out). It's not so bad if there isn't any noise around, but in a noisy environment it is next to impossible to hear the other party. I've searched through various threads already posted about this, but none of them have helped. My phone is currently running Windows Mobile 6. If anyone knows how to increase the volume in anyway (registry, using cab files, etc.) please let me know so I can enjoy my phone more completely .
Thanks!