CAB: \Extended_ROM\TimeSnyc.sa.CAB
-enable time sync automatically

Time Sync? Didnt it already sync with connected via usb? or does this cab do it over the air?

WMA's do not skip with WMP!!! I'm so happy. no more need for pocket music.

What do I need to do to get rid of this junkware again.. Is there anyway to do it without Total Commander, and just installing the cabs you want..

OK I'm back, remember me (the guy who was first)? I go have two 24oz Miller Lites and a couple pork chops and all hell breaks loose! Nice job, gang--and to think all I did was drop my 6700 off for an hour LOL

Couple observations:

DirectPush: CONFIRMED WORKING! E-mails to my Exchange Server 2003 SP2 are delivered in 10sec--sweet! Who needs BES???

EV-DO Speed: PSYCHO since the upgreade. This might be a fluke but I see 800+ kbps nearly always, and I cracked the magic 1 Mbps bracket for the first time ever (1164 Mbps)... PSYCHO.

I can't quite figure out a couple things about the CommMgr (perhaps because I sync with an Exchange Server?). The "ActiveSync" button is disabled. Also, when I tap the "Stop Data" button the phone just dials *777... curious.

WE GET AN EXTRA BUTTON!: Both buttons on the left side (#5 and #4) both have press and press-and-hold functionality. The "Start" button is hi-jacked by default and needs to be re-assigned to the Start Menu command. We can assign #4 and #5 to PIE, recorder, CommMgr and VoiceCommand... Sweet!

No new default/pre-installed themes... boo!

No GPS connection panel without hacking--rats!

More later as I dig!
Todd/Indy

I ran the unlocker, then the unhide reg file. [EDIT]No need to install total commander. Once unlocked and viewable, I can just use built-in file explorer.[/EDIT]

then started deleting files from there. That's the easiest way to do it.

__________________
iPhone 3G ..:.. Jailbroken 16GB Black
AT&T 8925 Tilt ..:.. WM 6.1 ..:.. SIM/CID unlocked
BlackBerry 8830 on Sprint ..:.. crappy work phone

pretty sure it does the hack referenced in this post:
http://www.pdaphonehome.com/forums/s...&postcount=107

-jeff

__________________
AT&T Tilt aka HTC Kaiser aka TyTn II
PPC 6700 is now my TV remote control and favorite paperweight lol

Okay, under Phone>Settings...
Network Service is now changed to "Home Only" and "Standard" versus "Sprint and "Roaming". Location Setting is by default off. Time Sync is under there too.

In Wireless Manager Push E-mail is titled "Microsoft DirectPush". Will be trying it out shortly since I've got a MailStreet account..

So far, nothing else stands out to me.

I just removed these two CAB files and hard reset. The top battery icon is STILL there. The lower one is too.

That confirms PT_RemoveHTCBatteryICON_Apache_206300.sa.CAB does remove the htc battery icon, but disproves that PowerICON.sa.CAB is for the power icon in the top bar.

__________________
iPhone 3G ..:.. Jailbroken 16GB Black
AT&T 8925 Tilt ..:.. WM 6.1 ..:.. SIM/CID unlocked
BlackBerry 8830 on Sprint ..:.. crappy work phone

only way i know of is with Total Commander.

You could do the Extended Cab Unlocker and than remove what you dont need than rebuild the Extended cab. so each reset will only install what you want and you wont have to use total commander. Do this at your own risk

No worries mate--I did get it from the Sprint store

Boldly go forth,
Todd/Indy

The Time is now on the Today Screen Next to the Date, instead on the Top.

I am working on breaking down what the new cabs in Ext_ROM do:
Here is the first then I am going to bed...more tomorrow...

PP_HTC_CM_Guardian_Apache_206300.sa.CAB

Looks to me like this might be some way to enforce SprintPCS network settings on every startup....I will let others comment on it and if this is really needed or not....

2 main files inside of this one...

\Windows\HTC_CM_Guardian.exe
\Windows\SPCS_Connection.xml

The EXE runs on every startup....
Here are the contents of the XML file

<wap-provisioningdoc>
<characteristic type="CM_Networks">
<characteristic type="Sprint">
<parm name="DestId" value="{F079757F-9357-4000-8305-9CA6B9B6CAEC}" />
</characteristic>
</characteristic>
<characteristic type="CM_ProxyEntries">
<characteristic type="HTTP-{F079757F-9357-4000-8305-9CA6B9B6CAEC}">
<parm name="SrcId" value="{F079757F-9357-4000-8305-9CA6B9B6CAEC}" />
<parm name="DestId" value="{436EF144-B4FB-4863-A041-8F905A62C572}" />
<parm name="Proxy" value="new-inet:1159" />
<parm name="Type" value="0" />
<parm name="Enable" value="1" />
</characteristic>
</characteristic>
<characteristic type="CM_PPPEntries">
<characteristic type="Sprint PCS Vision">
<parm name="DestId" value="{F079757F-9357-4000-8305-9CA6B9B6CAEC}" />
<parm name="Enabled" value="1" />
<parm name="Phone" value="#777" />
<parm name="CountryCode" value="" />
<parm name="AreaCode" value="" />
<parm name="RequirePw" value="0"/>
<parm name="UserName" value="" />
<parm name="Password" value="" />
<parm name="Domain" value="" />
<parm name="SpecificIpAddr" value="0" />
<parm name="IpAddr" value="" />
<parm name="SpecificNameServers" value="0" />
<parm name="DnsAddr" value="" />
<parm name="AltDnsAddr" value="" />
<parm name="WinsAddr" value="" />
<parm name="AltWinsAddr" value="" />
</characteristic>
</characteristic>

</wap-provisioningdoc>

Any thoughts out there?

__________________
HTC Touch Pro 2 (Sprint)
Sprint PPC6700

Hey all... wow I missed a lot of activity this evening. Many thanks to UpDownload for the files. It's great to have the original ROM package as well.

Someone posted on the previous page about the Roaming options being different. Are there still three options (Sprint only, Roaming, and Roam only)? Or did they remove the Roam only option? If so I'm going to figure out the registry entry to restore the Roaming only option (it comes in really handy when you want to determine who the local roaming partners are).

Ok I can see why they added this one. Might be a fix for the modem problem?

Quoted from the other thread.


http://pdaphonehome.com/forums/showp...2&postcount=83

Try doing a soft reset and see if the stuff you deleted out of the extended rom shows back up. That's what I'm seeing over here.

***Nevermind I got it working, back to my reinstalls

__________________
Eric Hicks, Microsoft MVP, Mobile-Devices
My Devices
Four PPC6600's, One PPC6700, Three PPC6800's,One Treo 700w,One Jas Jar,One Pantec Duo,One T-mobile Dash...Do I have too many devices?

Now it only says "Home Only" or "Standard". Thats all it says.

Stop any files from installing after the update?

Didnt have to re-assign mine. Let it install all the cabs.

Any one have any idea if it will be possible to get audio (other than phone) to bluetooth hedset like before this upgrade?

Where do you see that at?

__________________
*caf

Under Phone>Options>Settings>Services>Network Service.