I found an interesting debuging mode on my phone from a Treo post somewhere online. If you go into phone mode and enter ##33284# you enter this debugging/info mode (like ##786#).

I get the following fields:

Drop down box for refresh rates (how often numbers update). Drop down box with 1x and HDR. For those I get:

1x
Call Processing State -> 2 =m Paging Channel State
Service Option -> 0
Slot Cycle index -> 2
Band # -> -> Sleep Mode
CH # -> 50
SID # -> 4195
NID # -> 6
Active Set -> 48
Neighbor Set -> 186
Rx Power -> -96 dbm
Rx Ec/Io -> 25 db
Rx FER -> 0.00
Tx Adj -> 127
P_REV in use -> 6


HDR
Channel Number -> 150
Subnet Color Code -> 152
UATI (UATI104) -> 00 84 0A C0..... (not sure if this is a phone identifier so I'll leave some off here)
UATI (UATI024) -> 40 59 FD
Active Set Pilot PN -> 147
Rx Signal Strength -> 95
Rx Power -> -94 dbm
Channel PER -> 78
Requested Data Rate -> 0.000 kbps
HDR Session State -> 4 = Open State
Data Session State -> 0 = Null
Current IP Address -> N/A
AN/AAA authentication -> 1 = Authenticated

The numbers/values I entered above fluctuate on some or all the fields (some change sometimes, haven't seen them all change or figured out what they mean). Does anyone know what all these mean?

God damn it's hard to put in spaces and formating on this forum. How can I insert a table or a tab or even just a bunch of spaces in a row?

##775# does something also. it gets me to an "enter unlock code" screen

OK from the 6600 forum I found some more codes and descriptions (though some of the others they talk about don't work)

##775 Pst UPgrade PRL
##3282 [DATA] Data Provisioning (3 sub-tabs)
##7738 Protocol Revision Settion (only allows P_rev_6)
##2539 A-Key
##8626337 Preferred Vocoder Settings
##778 [PST] Advanced programming menu - BE VERY Careful HERE!!!