My Kyocera 7135 works find except there is no sound from ringer or keypad. I have checked the mute and volume in preferences but still nothing. Do I need to flash? Please help. Thanks

Please forgive the silly question but I used to work tech support... Is there a bell icon with a cross through it on the top LCD display? (this would mean that the phone was forced into silent mode by holding down the extenal down volume button)

If so, press and hold the up volume button until the icon clears to place back into non silent mode.

If this isn't the case, sorry.....

__________________
Here, have a clue. No, take two, they're small.....

No- No bell with a line through it. And when I turn the sound off/sound on buttons it says on the screen High volume....

I'm having that same problem. Any help would be appreciated. ~:o)

My guess would be a broken speaker or loose contact. Search the board, this topic has been brought up before.

Does the speaker phone work? If not, the speaker is the problem. If the speaker phone works I have no idea....

__________________
Here, have a clue. No, take two, they're small.....

I took it to a phone technician today and you guys were right...bad speaker. Thanks so much!!!