04-20-2009, 01:19 PM
|
|
|
Join Date: 04-20-2009
|
|
PDAPhone: HP IPAQ 6515
|
|
Carrier: none
|
| Posts:
1 |
 |
|
my HP 6515 stuck in welcome screen
Hi, all!
After a hard reset, my hp stuck in welcome screen!
I had tried this steps, but nothing!
((
1) Get the battery out of the iPaq, and wait for a few minutes while the "serial" image fades away slowly.
2) In the meantime, prepare your cradle, plugged into the AC charger and plugged via USB to your PC.
3) After a few minutes, with the screen of the iPaq completely gray, put the battery and battery cap back on (with our without SIM card), and put it on the cradle immediately.
4) The iPaq should start coming back to life, as if it were being hard reset. Let is stay on the welcome screen (i.e., do not tap it or anything).
5) Restart the upgrade process, it should proceed from there OK))
What can I do?
Last edited by GAF : 04-20-2009 at 01:35 PM.
|
|
|
|
|
Login
Panel
