I'm run the hpRUU.exe from dir TMOBILERST.zip with changed iPAQROM.nbf. After detecting my PDA, program say:
"Incorrect device SKU! Update cannot continue.
Current information about you iPAQ Pocket PC:
Model ID: HP iPAQ h6340
ROM Version: 1.11.10 ENG
Language: English
This upgrade is for:
Model ID: HP iPAQ h631x
ROM Version: 1.0.6.8
Language: English"
It's a sad truth...
For dmc874: Dave, I'm find this resolve many time ago. Give me hope...
1. In your program in dir iPAQDISK I see header.img and iPAQROM.img, summary size 4196904.
2. In dir c:\ipaq\sp30391, which created after install official update (version of ROM 1.11.10 ENG in this example) from HP I see iPAQROM.nbf too. Size of iPAQROM.nbf is 4196904 too.
3. With any program (for example, FAR) in "hand"-mode separate this iPAQROM.nbf from HP on two part. First part must have size equal your header.img, second part - remainder. Renamed both part in header.img and iPAQROM.img, copy both to the dir with replacing original header.img and iPAQROM.img, mount drive and make changes in mounted drive and make ROM with your program and flash PDA with TMOBILERST.zip. And see, that iPAQROM.nbf from official update (version of ROM 1.11.10) and iPAQROM.nbf from your program (on make it without cganges) is different. For example, I can't see any Tmobile's files.
4. IIWPO has been installed.
Location: Arlington, TX - I can see the Ballpark from here.
Posts:
456
OK. I think I see what you did. I am sorry I didn't get back with you but I read your post and got busy and forgot to come back. Basically you need to change the header to match you device. You did this by splitting the upgrade nbf from an HP upgrade with a program splitter, essentioally splitting off the header and appending it to the modified version.
__________________
Dave
Self-Proclaimed Baseball Nut. Or is that just Nut? :bangin:
Flash went without a hitch. Did not even have to go in bootloader mode.
The grand plan is to make some cab files full of registry entries and put 2MB worth of apps in the extended rom that will run directly from there. Similiar to what T-Mobile is already doing with their IM clients and other misc applications. I believe Visual Studio 2005 can make cab files with registry entries for mobile devices. I'll have to play with that a bit.
Now if I can only figure out the color palette for the splash screen. Made a custom splash screen, shifted the colors, saved as 16 bit, and still got crappy colors when viewing from a soft reset. Read the thread related to splash screen colors, but I must be missing something.
1. If I add apps (cab format) into extend_rom, after every hard reset, these apps will be installed in Rom, not in Ram, right ?
2. All the iPAQDISK.zip links in this thread are down, can anyone upload it to somewhere, such as rapidshare ?
3. I use h6315 with T-Mobile. The iPAQROM.img in this thread has a Carrier-gen.ver, does that matter ?
4. I flash my ppc w/ lvlolvlo's Set IV ROM from here, the description of the Set IV ROM says "Please be advised, after you install this ROM you will have two applications installed on your unit:
i bought hp ipaq 6365 in norway.. i dun much abt it
once i try 2turn it on, its on then it goes off.. there is any solution for it.
some one please help me out.. thnx
__________________ "I know and I'm always believe there's a hope and a chance for the one who has trying something hard to do cause that is the only way things to make something possible, than just only impossible like they said before ..." hp iPAQ h6365 / h6345 / h6340 / h6325 / h6320/ h6315 / h6310