I have used the iPhono headset for my music all the time even before the update and never had a single problem. Still can't connect with the computer with the 6315 but that may be because of SPII. BTW, read somewhere that HP pushed back the release of the 6515 until the third quarter - bummer.
I'm using ROM 1.10.09 ITA (just updated) and I'm experiencing lots of problems with h6340...
So: HS820 pairs fine, no problems at all. When the phone rings there are no problems reconnecting the BT headset.
My major problem is that my mic volume sometimes is too low and people at the other end can't hear me.
Discovered there were no settings for mic volume (besides the AGC ON/OFF that at the moment doesn't seem to make a real change to the volume) I found out that in registry there is a key Hkey_Local_mach/software/widcomm/connections/0001 or 0002 depends upon how many connections u have to BT.
I changed Micvolume from 08 to 20 and 30 and 40, and the people I called admitted there was a clear and audible improvement to the audio from my BT headset.
But sometimes, still, some people tell me they don't hear me loud enough!
It seems I always get good mic volume when I call, but not when I answer a call.
BTW, I deselected the option to play notifies and warnings to the BT headset, but only to use it for phone calls.
I have just recently purchaced the Razr (black) and picked up the Dell Axim x30. I would like to connect the two together for a PAN (Personal Area Network). Here is what I have done so far...
I have placed the phone on discover mode, and the PDA finds the phone. The phone bonds with the PDA. This tells me that the bluetooth devices are sinking up with one another. SWEET!!
I then need to set up the country code, area code and number. As I am on Cingular (AT&T GPRS network) I use *99*#, or *99#, or *99***#1, I then need to set up the username and password, wap@cingulargprs.com, and CINGULAR1 for the password. Sounds good right?
I receive this error, "the answering modem has disconnected. To check your connection and change them yada yada yada.."
When I tap the conection to use, it tells me
Connecting to Dial up
Dialing from : Home
Using Bluetooth dial up modem
I have had many calls to Cingulars Tech support. I should have came to where the real support is.. here! People, help the fellow confused and direct him to the light...
I've patched my 6315 to 6365. AV profile was working fine. But when I connect to Handsfree, I see the pairing but the audio is not transferred to the headphones. I have seen this behaviour with 6315 prior to patching.
The handsfree used to work fine until something happens (not sure what it is). But after that only pairing, no audio. Thanks in advance for any help.
***
Forgot to mention, I applied SP30003 for AV profile. This was meant for h5555.
***
Last edited by jingbugle : 06-08-2006 at 03:40 PM.
Paired immediately. I can go out of range, lose the connection, walk back in range and it will reconnect in about 15 seconds with no involvement from me. $22.99 on eBay, can't beat it. Works perfectly.
Belkin FBT003 ver. 2.11 Bluetooth Dongle - SUCCESS
6315 paired easily with my laptop. Services offered by the 6315 that this dongle can use:
Audio Gateway
Bluetooth Serial Port
Dial-up Networking
File Transfer
Network Access
OBEX Object Push
I have personally used the Audio Gateway, Dial-up Networking, and File Transfer. All work fine, I have no reason to suspect the others wouldn't as well.
h6340 and Motorola HS820, bluetooth mic volume
Handsfree pairs but no sound (HT820)
Login
Panel
