PDAPhoneHome.com - View Single Post - Moderate fix for low Volume issues

Quote:

Originally Posted by kenn

Another question... I opened up the file to view it just to be darn sure I have the new audiopara.csv and it is, in fact, correct. It has the coarse settings that I installed.... My question is this. What is the max volume setting on the phone or do you know? Is FFFF the peak or do additional steps exist? I'd like to try one more step up -- basically shift all the earcup and bluetooth settings one more notch up and drop the lowest setting of 6000 (make it 8000) and so on...

PHONE_BTHEADSET,0,0,5,4000,4000,0,7FB2,5A67,422,FFFF,0,190

That is the entry for the Blutetooth headset. Is there only one volume there? -- i.e. FFFF in there, or is the "HEADSET VOL0" the setting for bluetooth also?

Your Decimal values for the Earcouple (coarse) are:
65,536 FFFF
57,344 E000
49,152 C000
40,960 A000
32,768 8000
24,576 6000

You are using 8192 decimal steps between each volume. Could I go 11FFF for the top setting (73727) or is it maxed at FFFF (65,536)?

Thanks in advance.

P.S. I didn't really notice any significant distortion on the highest setting...

The Max is FFFF. I did not do the SpeakerPhone to FFFF because I was worried I might blow it and it's already distorting anyway. The EarPiece I did max out to FFFF. Watch out when you reboot because it will set the volume to not be Max unless you twiddle registry too. Earpiece is definitely louder but it's not huge. Speaker phone is lot louder.

I experimented with Bluetooth too but I had no luck, it made no change. See my opening post.

For the record, the Touch has AudioPara.csv in Windows Directory. And the Factory setup sounds good. It might be worth diffing Mogul and Touch AudioPara.csv's