Ok so I followed the directions above for the most part, listing it below:

1. Install threaded SMS (cody version) normally. ***Copy the cab file as is to your storage card and run from there***

2. Go to and delete the following registry key: (delete the entire PC10 folder)

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\PC10

3. Go to the following:

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByGenericId\

Click on the first key (it should be a long alphanumeric number) then go into the GenId key inside of that and copy its value. (Make sure you copy it)

4. Then go to and change the following registry string:

HKEY_LOCAL_MACHINE\Security\PushRouter\Registrations\ByCTAndAppId\application/vnd.wap.mms-message\Default

You will change the value of Default = to whatever your GenId value was, that you copied.

5. Then make sure threaded SMS and stock MMS are not running and do a soft reset.

This is how I got it to work without problems, should work just fine, getting all notifications just fine now and SMS and stock MMS are working fine. For MMS messages you will still use your stock application.

Much thanks to everyone!

--

__________________
"In the end, the things we regret most are the chances we never took"