Most times the bridge numbers come in a meeting invite and will be in my calendar. Some are the same numbers and some will be unknown. It is tough remembering a 10 digit pin number if you have never seen it. Creating a contact or speed dial for all the combinations would be hard to impossible.

I can copy the number from the calendar and paste it into the dialer when the call is up, but the digits are not sent on the voice path to the conference bridge. They just sit on the input line of the dialer. If I press the talk button the dialer will try to place another call.

With the Palm phone (6035 and tried it with a 650), you can highlight the pin number (or any number fo that matter) and press the hardware dialer key and it will send the digits to the dialer and send them on the voice path.

I do 10 to 20 conference calls a week and it was one feature that I used constantly. They XV6600 is so much nicer than the Palm, but this may be something tha makes me find another phone.

Is the dialer that come with the XV6600 part of the Windows Mobile 2003 SE code? I tried to see if there are other dialers, but there aren't many and don't add this capability.

Any help is appreciated.